Gas Sample Probe
Gas Sample Probe

The JCT model JES301 heated gas sample probe is used for the extraction and filtration of sample gases for use in continuous measurement analysis systems. The probe is available in heated and unheated versions and has a comprehensive range of sampling tubes including a specific filter tube for extremely high dust loads. The JES 301 is characterized by extremely low-maintenance operation, fully adjustable temperature range, robustness and effective filter element.

Heated Sample Line
Heated Sample Line

Heated sample hoses are used to transport the measured sample gas from the sample probe to the analysis system. The elevated temperature of the hose maintains the integrity of the sample gases without loses due to moisture drop-out or dissolution.

Sample Gas Cooler
Sample Gas Cooler

The sample gas coolers are specially designed for use in the emission monitoring. Thanks to the low dissolution rates of water-soluble gases very small concentrations of e.g. SO2 can be measured. In addition, the gas coolers are modular designed. This means a device can be equipped with humidity control, remote diagnosis, gas pump and acid dosing pump. There are some type of gas coolers such as Compressor, Peltier in continues and portable one.

Accessories
Accessories

There are widely ranges for accessories for the sample conditioning system which can be used separately to maintain the extractive system in the stable, reliable and accurate measurement. These components include filters, connector and fittings, Condensate Strainer, Gas Sample pump in variant capacity and ingress protection, condensate detector, etc.

NOx Converter
NOx Converter

The JCT JNOX series of NOx converters are designed to efficiently convert NO2 to NO prior to measurement by NDIR extractive analysers. The high quality and reliability of the conversion is characterized by an efficiency of over 95% at high flow rates, as well as a low maintenance, long life converter cartridge.